Cookie Consent by Free Privacy Policy website

Compression load cell ME1VIS


Download PDF

The new ME1VIS compression load cells have the ability to view directly on the load cell the value of the applied load. Through a built-in indicator ME1VIS is capable to display applied load, set filters, set the peak and linearize load points.

Testes and calibrations performed in COMPRESSION with the dynamometer mounted on a bearing support with correctly tightened clamping screws.

EN61000-6-2, EN61000-6-3, EN61010-1

Download usage manual


Zoom Click to enlarge image

Compression load cell ME1VIS Compression load cell ME1VIS Schema

Technical Specifications

MaterialStainless steel
Nominal load10, 20, 30, 35, 50, 100, 200 t
Limit load150 % F.S.
Breaking load300 % F.S.
Nominal load deflection0.06 mm
Supply voltage5 - 13 V dc
Max absorption1.5 W
Linearity0,05 % F.S.
Hysteresis0,03 % F.S.
Reapeatability0,02 % F.S.
Input resistance700-710 Ohm
Output resistance700-705 Ohm
Thermal compensation-10 / +50C (14 / +122F)
Operating temperature-20 / +50C (-4 / +122F)
Temperature deviation zero0,003 % F.S. / C
Temperature deviation full scale0,002 % F.S. / C
Protection classIP 40
Display5 digit red led
Mechanical keypad3 mechanical keys
Internal resolution24 bit
Digital filter0.1 Hz - 50 Hz
Fixing screws: resistance class12,9
Fixing screws: tightening torque10-20t: 70 Nm, 30-35t: 125 Nm, 50-200t: 300Nm
Standard cable length5 m Power supply connector M12 5P (shield not connected to the load cell body)
For the complete and latest technical specifications, please refer to the technical data sheet which can be downloaded here:
Download PDF

Connections

TypePower connector M12 5P
Length5 m (body lead cell not connected shield)
1+ IN
2- IN
3RS485 - OPTIONAL
4RS485 + OPTIONAL

MOUNTING OF THE LOAD CELL

General precautions to be followed in the installation and assembly of load cells:

  • Follow the direction of application of force on the load cell
  • Do not exceed the limits of the temperature as indicated in the data sheet
  • Do not remove labels from the load cell
  • Adequately protect the cables with sleeves or channels
  • Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
  • Do not carry out any welding on the mechanical structure after mounting the load cell
  • Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
  • In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
  • Protect load cell from any dust accumulation with any appropriate means