Cookie Consent by Free Privacy Policy website

Indicator SLIM4C

Download PDF

GICAM announced a new tool that further completes the range of portable indicators with independent power supply for displaying load cells with independent channels. The SLIM4C consists of 4 instruments that are able to display as many dedicated channels.

The 4 instruments are mounted in a practical case to be taken directly to the places where it is necessary to detect the reading of the load cells. It also has an independent power supply via rechargeable batteries and is complete with a battery charger.

A maximum of 2 350 Ohm load cells (or 4 700 Ohm cells) can be connected in parallel to each input channel.

Zoom Click to enlarge image

Indicator SLIM4C Indicator SLIM4C Schema

Technical Specifications

Power supplyWith batteries complete with charger
Max power consumption1.5 W (each SLIM)
IsolationClass III
Operating temperature-10 / +50 C (14 / 122 F) Humidity Maximum 85% non-condensing
Display5-digit numeric red 7-segment LEDs (h 10 mm)
Keyboard3 mechanical keys
Load cell input featuresMaximum 2 cells of 350 Ω in parallel (or 4 cells of 700 Ω)
Linearity< 0.01% of full scale
Temperature deviation< 0.001% of full scale/C
Internal resolution24 bit
Measuring rangeFrom -3.9 mV/V to +3.9 mV/V
Digital filter0.1 Hz - 50 Hz
Number of weight decimalsFrom 0 to 3 decimals
Zero / FS CalibrationExecutable through buttons
Cell cable interruption checkAlways present
Program code memory32 kByte
Data memory2 kByte
Conforms to standardsEN61000-6-2, EN61000-6-3, EN61010-1
Briefcase overall dimensions260 x 250 x 125 mm (10.2 x 9.8 x 4.9 in)
For the complete and latest technical specifications, please refer to the technical data sheet which can be downloaded here:
Download PDF


General precautions to be followed in the installation and assembly of load cells:

  • Follow the direction of application of force on the load cell
  • Do not exceed the limits of the temperature as indicated in the data sheet
  • Do not remove labels from the load cell
  • Adequately protect the cables with sleeves or channels
  • Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
  • Do not carry out any welding on the mechanical structure after mounting the load cell
  • Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
  • In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
  • Protect load cell from any dust accumulation with any appropriate means